As an Amazon Associate, Barista Life earns from qualifying purchases.
Grind espresso on a 1Zpresso K-Ultra between 0.2.4 and 0.5.0 on the external dial, per Honest Coffee Guide's compiled K-Ultra chart; that is roughly 24 to 50 clicks from zero. Start near number 4 and move 2 or 3 clicks at a time, since each click is 20 microns.
1Zpresso K-Ultra grind settings by brew method
| Brew method | 1Zpresso K-Ultra setting |
|---|---|
| Espresso | 0.2.4 to 0.5 (about 24 to 50 clicks) [1] |
| Pour over | 0.5.4 to 1 full rotation (V60 at 0.5.3 to 0.9.2) [1] |
| AeroPress | 0.4.3 to 1 full rotation [1] |
| Moka pot | 0.4.8 to 0.8.6 [1] |
| French press | 0.9.1 to 1 full rotation [1] |
| Cold brew | around 1 full rotation [1] |
Every numbered range above was checked against the source in the footnote it carries; where a manufacturer publishes nothing for a method, the row says so instead of inventing a number. Ranges are windows, not verdicts. Beans, roast age, and dose move the right setting inside each window, which is why the dial-in ladder below matters more than any single number.
How the 1Zpresso K-Ultra adjustment works
The 1Zpresso K-Ultra uses an external dial with 10 numbers and 100 clicks per rotation at 20 microns per click (1Zpresso's spec), read as rotation.number.click. Find your zero before trusting any chart: with the hopper empty, tighten toward fine until the burrs just touch, call that zero, and count from there. If your zero point is calibrated differently from the chart's, every range shifts by the difference, which explains most "the chart is wrong" complaints. Our full 1Zpresso K-Ultra review covers how it earns (or does not earn) a spot on the counter.
Dial it in from the chart in 3 steps
1. Set the middle of the espresso range above and brew once, changing nothing else. 2. Taste against the two failure directions: sour, thin, or fast means grind finer; bitter, harsh, or stalled means grind coarser. The full logic lives in why espresso runs sour and why it runs bitter. 3. Move in small steps, one variable at a time, and write each attempt down; the free dial-in logbook exists for exactly this, and the printable dial-in cheat sheet keeps the correction table next to the machine.
Get the grinder
The 1Zpresso K-Ultra is on Amazon: check the current 1Zpresso K-Ultra price. Prices move often enough that we link the search rather than quote a number that will be stale by Friday.
Related reading
FAQ
What is the best 1Zpresso K-Ultra setting for espresso? 0.2.4 to 0.5 (about 24 to 50 clicks). Treat the range as a window, start near its middle, and adjust on taste: coarser if the cup is bitter, finer if it is sour or weak.
Can the 1Zpresso K-Ultra grind for espresso? Espresso on the 1Zpresso K-Ultra: 0.2.4 to 0.5 (about 24 to 50 clicks). See the table on this page for every other method.
How do I read the 1Zpresso K-Ultra adjustment? The 1Zpresso K-Ultra uses an external dial with 10 numbers and 100 clicks per rotation at 20 microns per click (1Zpresso's spec), read as rotation.number.click. Zero is with the burrs fully closed, and higher numbers or more clicks mean a coarser grind.
Sources
- [1] Honest Coffee Guide's K-Ultra chart: https://honestcoffeeguide.com/1zpresso-k-ultra-grind-settings/
Improving your brew? Browse our free coffee tools, print the brew ratio card, and try our method: the descending pour.