As an Amazon Associate, Barista Life earns from qualifying purchases.
Set a Baratza Encore ESP between 16 and 30 for pour over, per Honest Coffee Guide's compiled Baratza Encore ESP chart; inside that, a V60 cone wants the tighter 15 to 25 band. Start in the middle of the window and adjust on taste: finer if the brew drains fast and tastes sour, thin or weak, coarser if the bed stalls, the brew takes far longer than usual, or the cup tastes bitter.
Baratza Encore ESP pour over settings, and the bands either side
| What | Setting on the Baratza Encore ESP |
|---|---|
| Pour over window | 16 to 30 [1] |
| V60 cone, the tighter band inside it | 15 to 25 [1] |
| The AeroPress band on the same chart | 8 to 30 [1] |
| The French press band on the same chart | 25 to 38 [1] |
| Full grind range of the grinder | 230 to 1380 microns [1] |
The neighbouring bands are there for context. If your pour over sits at one end of its window and still tastes wrong, the answer is usually a different variable, not another step in the same direction, because past that edge you are grinding for a different brew method.
Why pour over wants this part of the dial
Pour over is percolation: water passes through the bed once, under gravity, and the grind sets how fast the bed drains. Drawdown time is the tell, and it is the number to watch before you argue with the taste.
Dial it in from the chart in 3 steps
1. Set the middle of the pour over window above and brew once, changing nothing else. 2. Taste against the two failure directions: finer if the brew drains fast and tastes sour, thin or weak, coarser if the bed stalls, the brew takes far longer than usual, or the cup tastes bitter. The full logic is in the pour over guide and the pour over ratio. For the rest of the recipe, see what to do when a pour over is too slow. 3. Move in small steps and write each attempt down; the free dial-in logbook exists for exactly this. Keep the pour pattern the same while you change grind. Pouring technique moves drawdown as much as a couple of settings do.
How the Baratza Encore ESP adjustment reads
The Baratza Encore ESP uses a stepped collar with 40 numbered settings, tuned at the fine end for espresso. Find your zero before trusting any chart: with the hopper empty, close the burrs until they just touch, call that zero, and count from there. A zero point calibrated differently from the chart's shifts every range by the difference, which is behind most complaints that a chart is wrong. The full Baratza Encore ESP grind settings chart has every other brew method on one page.
Pour over on other popular grinders
| Grinder | Pour over setting |
|---|---|
| Turin DF64 Gen 2 | 24 to 77 [2] |
| 1Zpresso J-Max | 1.6.6 to 3.8.1 [3] |
| KINGrinder K6 | 0.49 to 1.50 [4] |
| Fellow Opus | 3 to 8.5 [5] |
| 1Zpresso X-Pro | 1.2.0 to 3.0.0 [6] |
Get the grinder
The Baratza Encore ESP is on Amazon: check the current Baratza Encore ESP price. We link the search rather than quote a price that will be stale by Friday.
Related reading
FAQ
What grind setting is pour over on the Baratza Encore ESP? 16 to 30 on the compiled Baratza Encore ESP chart. Start in the middle of that window, brew once with everything else held steady, then move in small steps on taste.
My pour over tastes wrong on the Baratza Encore ESP. Which way do I move? If the brew drains fast and tastes sour, thin or weak, go finer. If the bed stalls, the brew takes far longer than usual, or the cup tastes bitter, go coarser. Change one thing at a time and write down what you did.
Where do these Baratza Encore ESP numbers come from? Honest Coffee Guide's compiled Baratza Encore ESP chart, read from the published table and cited in the sources list on this page. It is a compiled chart built from that site's research and reader feedback, not a manufacturer document, so treat every range as a window rather than a verdict.
Sources
- [1] Honest Coffee Guide's Baratza Encore ESP chart: https://honestcoffeeguide.com/baratza-encore-esp-grind-settings/
- [2] Honest Coffee Guide's Turin DF64 Gen 2 chart: https://honestcoffeeguide.com/turin-df64-gen-2-grind-settings/
- [3] Honest Coffee Guide's 1Zpresso J-Max chart: https://honestcoffeeguide.com/1zpresso-j-max-grind-settings/
- [4] Honest Coffee Guide's KINGrinder K6 chart: https://honestcoffeeguide.com/kingrinder-k6-grind-settings/
- [5] Honest Coffee Guide's Fellow Opus chart: https://honestcoffeeguide.com/fellow-opus-grind-settings/
- [6] Honest Coffee Guide's 1Zpresso X-Pro chart: https://honestcoffeeguide.com/1zpresso-x-pro-grind-settings/
Barista Life runs on coffee people. Browse the Barista Life shop to support the site.
Get the good coffee stuff
One email a week: what we verified, what is worth buying, and what is not. No spam, unsubscribe any time.