As an Amazon Associate, Barista Life earns from qualifying purchases.
Grind espresso on a Turin DF54 between 8 and 30 on the dial, per Honest Coffee Guide's compiled DF54 chart. Start near 20 with a fresh medium roast and creep finer as the beans age; the dial is stepless, so treat the printed numbers as landmarks rather than clicks.
Turin DF54 grind settings by brew method
| Brew method | Turin DF54 setting |
|---|---|
| Espresso | 8 to 30 [1] |
| Pour over | 35 to 90 (V60 at 34 to 67) [1] |
| AeroPress | 24 to 90 depending on steep time [1] |
| Moka pot | 29 to 62 [1] |
| French press | 67 to 90 [1] |
| Cold brew | 79 to 90 [1] |
Every numbered range above was checked against the source in the footnote it carries; where a manufacturer publishes nothing for a method, the row says so instead of inventing a number. Ranges are windows, not verdicts. Beans, roast age, and dose move the right setting inside each window, which is why the dial-in ladder below matters more than any single number.
How the Turin DF54 adjustment works
The Turin DF54 uses a stepless dial numbered 0 to 90; Honest Coffee Guide charts the working window at 110 to 900 microns. The same grinder ships under the MiiCoffee, Solo, G-IOTA, Coffee Tech, Lucca and DF64Coffee.com labels. Find your zero before trusting any chart: with the hopper empty, tighten toward fine until the burrs just touch, call that zero, and count from there. If your zero point is calibrated differently from the chart's, every range shifts by the difference, which explains most "the chart is wrong" complaints. Our full Turin DF54 review covers how it earns (or does not earn) a spot on the counter.
Dial it in from the chart in 3 steps
1. Set the middle of the espresso range above and brew once, changing nothing else. 2. Taste against the two failure directions: sour, thin, or fast means grind finer; bitter, harsh, or stalled means grind coarser. The full logic lives in why espresso runs sour and why it runs bitter. 3. Move in small steps, one variable at a time, and write each attempt down; the free dial-in logbook exists for exactly this, and the printable dial-in cheat sheet keeps the correction table next to the machine.
Get the grinder
The Turin DF54 is on Amazon: check the current Turin DF54 price. Prices move often enough that we link the search rather than quote a number that will be stale by Friday.
Related reading
FAQ
What is the best Turin DF54 setting for espresso? 8 to 30. Treat the range as a window, start near its middle, and adjust on taste: coarser if the cup is bitter, finer if it is sour or weak.
Can the Turin DF54 grind for espresso? Espresso on the Turin DF54: 8 to 30. See the table on this page for every other method.
How do I read the Turin DF54 adjustment? The Turin DF54 uses a stepless dial numbered 0 to 90; Honest Coffee Guide charts the working window at 110 to 900 microns. The same grinder ships under the MiiCoffee, Solo, G-IOTA, Coffee Tech, Lucca and DF64Coffee.com labels. Zero is with the burrs fully closed, and higher numbers or more clicks mean a coarser grind.
Sources
- [1] Honest Coffee Guide's Turin DF54 chart: https://honestcoffeeguide.com/turin-df54-grind-settings/
Barista Life runs on coffee people. Browse the Barista Life shop to support the site.
Get the good coffee stuff
One email a week: what we verified, what is worth buying, and what is not. No spam, unsubscribe any time.