As an Amazon Associate, Barista Life earns from qualifying purchases.
Grind espresso on a Turin DF64V between 8 and 27 on the dial, per Honest Coffee Guide's compiled DF64V chart. That band is a touch tighter than the DF54's, which is what the larger 64mm burr set buys you: more resolution inside the range that matters for shots.
Turin DF64V grind settings by brew method
| Brew method | Turin DF64V setting |
|---|---|
| Espresso | 8 to 27 [1] |
| Pour over | 31 to 82 (V60 at 30 to 59) [1] |
| AeroPress | 22 to 85 depending on steep time [1] |
| Moka pot | 26 to 55 [1] |
| French press | 59 to 90 [1] |
| Cold brew | 70 to 90 [1] |
Every numbered range above was checked against the source in the footnote it carries; where a manufacturer publishes nothing for a method, the row says so instead of inventing a number. Ranges are windows, not verdicts. Beans, roast age, and dose move the right setting inside each window, which is why the dial-in ladder below matters more than any single number.
How the Turin DF64V adjustment works
The Turin DF64V uses a stepless dial numbered 0 to 90 with a variable speed motor; Honest Coffee Guide charts the working window at 110 to 1000 microns and lists burr upgrades for it. The same grinder ships under the MiiCoffee, Solo, Coffee Tech and DF64Coffee.com labels. Find your zero before trusting any chart: with the hopper empty, tighten toward fine until the burrs just touch, call that zero, and count from there. If your zero point is calibrated differently from the chart's, every range shifts by the difference, which explains most "the chart is wrong" complaints.
Dial it in from the chart in 3 steps
1. Set the middle of the espresso range above and brew once, changing nothing else. 2. Taste against the two failure directions: sour, thin, or fast means grind finer; bitter, harsh, or stalled means grind coarser. The full logic lives in why espresso runs sour and why it runs bitter. 3. Move in small steps, one variable at a time, and write each attempt down; the free dial-in logbook exists for exactly this, and the printable dial-in cheat sheet keeps the correction table next to the machine.
Get the grinder
The Turin DF64V is on Amazon: check the current Turin DF64V price. Prices move often enough that we link the search rather than quote a number that will be stale by Friday.
Related reading
FAQ
What is the best Turin DF64V setting for espresso? 8 to 27. Treat the range as a window, start near its middle, and adjust on taste: coarser if the cup is bitter, finer if it is sour or weak.
Can the Turin DF64V grind for espresso? Espresso on the Turin DF64V: 8 to 27. See the table on this page for every other method.
How do I read the Turin DF64V adjustment? The Turin DF64V uses a stepless dial numbered 0 to 90 with a variable speed motor; Honest Coffee Guide charts the working window at 110 to 1000 microns and lists burr upgrades for it. The same grinder ships under the MiiCoffee, Solo, Coffee Tech and DF64Coffee.com labels. Zero is with the burrs fully closed, and higher numbers or more clicks mean a coarser grind.
Sources
- [1] Honest Coffee Guide's Turin DF64V chart: https://honestcoffeeguide.com/turin-df64v-grind-settings/
Barista Life runs on coffee people. Browse the Barista Life shop to support the site.
Get the good coffee stuff
One email a week: what we verified, what is worth buying, and what is not. No spam, unsubscribe any time.