As an Amazon Associate, Barista Life earns from qualifying purchases.
Set a Turin DF64 Gen 2 between 53 and 90 for french press, per Honest Coffee Guide's compiled Turin DF64 Gen 2 chart. Start in the middle of the window and adjust on taste: finer if the cup tastes thin or sour after a normal steep, coarser if the plunger fights you and the cup is muddy with sediment at the bottom.
Turin DF64 Gen 2 french press settings, and the bands either side
| What | Setting on the Turin DF64 Gen 2 |
|---|---|
| French press window | 53 to 90 [1] |
| The pour over band on the same chart | 24 to 77 [1] |
| The cold brew band on the same chart | 65 to 90 [1] |
| Full grind range of the grinder | 180 to 1050 microns [1] |
The neighbouring bands are there for context. If your french press sits at one end of its window and still tastes wrong, the answer is usually a different variable, not another step in the same direction, because past that edge you are grinding for a different brew method.
Why french press wants this part of the dial
A French press is full immersion behind a metal filter, so the grounds sit in the water for the whole brew and nothing fine gets caught on the way out. Coarse is not a style choice here, it is what keeps silt out of the cup and the plunger moving.
Dial it in from the chart in 3 steps
1. Set the middle of the french press window above and brew once, changing nothing else. 2. Taste against the two failure directions: finer if the cup tastes thin or sour after a normal steep, coarser if the plunger fights you and the cup is muddy with sediment at the bottom. The full logic is in the French press ratio and the French press grind size chart. For the rest of the recipe, see French press tips. 3. Move in small steps and write each attempt down; the free dial-in logbook exists for exactly this. If the cup is gritty at the coarsest setting on the chart, the problem is burr alignment or fines, not the number on the dial.
How the Turin DF64 Gen 2 adjustment reads
The Turin DF64 Gen 2 uses a stepless dial numbered from 0 at the fine end up past 90. Find your zero before trusting any chart: with the hopper empty, close the burrs until they just touch, call that zero, and count from there. A zero point calibrated differently from the chart's shifts every range by the difference, which is behind most complaints that a chart is wrong. The full Turin DF64 Gen 2 grind settings chart has every other brew method on one page.
French press on other popular grinders
| Grinder | French press setting |
|---|---|
| 1Zpresso ZP6 | 3.9 to 7.0 [2] |
| KINGrinder K2 | 94 to 140 [3] |
| KINGrinder K4 | 1.22 to 2.34 [4] |
| Turin DF54 | 67 to 90 [5] |
| Turin DF64V | 59 to 90 [6] |
Get the grinder
The Turin DF64 Gen 2 is on Amazon: check the current Turin DF64 Gen 2 price. We link the search rather than quote a price that will be stale by Friday.
Related reading
FAQ
What grind setting is french press on the Turin DF64 Gen 2? 53 to 90 on the compiled Turin DF64 Gen 2 chart. Start in the middle of that window, brew once with everything else held steady, then move in small steps on taste.
My french press tastes wrong on the Turin DF64 Gen 2. Which way do I move? If the cup tastes thin or sour after a normal steep, go finer. If the plunger fights you and the cup is muddy with sediment at the bottom, go coarser. Change one thing at a time and write down what you did.
Where do these Turin DF64 Gen 2 numbers come from? Honest Coffee Guide's compiled Turin DF64 Gen 2 chart, read from the published table and cited in the sources list on this page. It is a compiled chart built from that site's research and reader feedback, not a manufacturer document, so treat every range as a window rather than a verdict.
Sources
- [1] Honest Coffee Guide's Turin DF64 Gen 2 chart: https://honestcoffeeguide.com/turin-df64-gen-2-grind-settings/
- [2] Honest Coffee Guide's 1Zpresso ZP6 chart: https://honestcoffeeguide.com/1zpresso-zp6-grind-settings/
- [3] Honest Coffee Guide's KINGrinder K2 chart: https://honestcoffeeguide.com/kingrinder-k2-grind-settings/
- [4] Honest Coffee Guide's KINGrinder K4 chart: https://honestcoffeeguide.com/kingrinder-k4-grind-settings/
- [5] Honest Coffee Guide's Turin DF54 chart: https://honestcoffeeguide.com/turin-df54-grind-settings/
- [6] Honest Coffee Guide's Turin DF64V chart: https://honestcoffeeguide.com/turin-df64v-grind-settings/
Barista Life runs on coffee people. Browse the Barista Life shop to support the site.
Get the good coffee stuff
One email a week: what we verified, what is worth buying, and what is not. No spam, unsubscribe any time.